How to operate to prolong the lifespan of your CNC machine tool!

CNC machining refers to a mechanical processing method that processes parts on CNC machine tools and uses digital information to control the displacement of parts and tools. It is an effective way to solve the problems of variable variety, small batch size, complex shape, high accuracy of parts, and achieve efficient and automated processing.

The process procedures for CNC machine tool processing and traditional machine tool processing are generally consistent, but due to the fact that CNC is a one-time clamping process that continuously and automatically processes all turning processes, some precautions need to be taken after completing CNC machine tool processing.
1. Remove chips, wipe the machine tool, and maintain a clean state with the environment when using the machine tool.
2. Pay attention to checking or replacing the oil wiping plate on the worn out machine tool guide rail.
3. Check the condition of lubricating oil and coolant, and add or replace them in a timely manner.
4. Turn off the power supply and main power supply on the machine tool operation panel in sequence.
5. When starting the machine tool, the principles of first returning to zero (except for special requirements), manual, jog, and automatic should be followed. The operation of the machine tool should follow the principle of first low speed, medium speed, and then high speed, with the low and medium speed running time not less than 2-3 minutes. Only after confirming that there are no abnormal situations can work begin.
6. It is strictly prohibited to strike, correct, and correct workpieces on the chuck or between the tips. It is necessary to confirm the clamping of the workpieces and cutting tools before proceeding with the next step of work.
7. The operator must stop the machine when changing tools, workpieces, adjusting workpieces, or leaving the machine tool during work.
8. The safety and protective devices on the machine tool must not be dismantled or moved arbitrarily by the operator.
9. Before the machine tool starts processing, it is necessary to use a program verification method to check whether the program used is similar to the processed part. After confirming that there are no errors, the safety protection cover can be properly installed and the machine tool can be started for part processing.