The maintenance of CNC Machining Center

The parts and methods that need to be maintained during the use of the machining center.

1. Appearance maintenance: keep the inner and outer surfaces of the machine tool clean. It mainly removes iron filings, oil stains and other sundries in the machine, on the workbench and on the three-axis telescopic shield.

2. Maintenance of cooling water tank: Regularly check the liquid level, add coolant (or water) in time, and replace it regularly.

3. Tool magazine maintenance: keep it clean, and place the tools neatly. Before operation, check whether the tool magazine is running normally, whether there is a disordered knife, a knife falling, etc., and the tool handle screw should not be loose or bruised.

4. Maintenance of electrical cabinets: Check whether the cooling fans are working properly, and clean up the dust and debris on the fans and filters in time.

5. Air source maintenance: check whether the pressure of the pneumatic control system is normal, whether there is air leakage, and keep the pipeline smooth;

6. Lubricating oil maintenance: Check the oil volume of the spindle oil cooling oil tank and whether it is working properly, and add cooling oil in time; check the oil volume of the guide rail lubricating oil tank, if the oil volume is insufficient, add lubricating oil in time.

7. Hydraulic oil maintenance: Check whether there is any abnormal noise in the hydraulic pump of the oil tank, whether the working oil level is normal, add hydraulic oil in time, whether there is leakage in the pipeline and each joint, and whether the pressure of the pressure gauge is normal.

8. Peripheral site maintenance: Clean the iron filings and debris around the equipment every day, keep the surrounding site clean and tidy, and the workpieces are placed neatly.

9. When necessary, you can do a machine tool damage evaluation to fully understand the machine tool condition.